North Carolina, County Marriage Records (FamilySearch Historical Records)Edit This Page
From FamilySearch Wiki
|This article describes a collection of historical records available at FamilySearch.org.|
Access the records: North Carolina, County Marriages, 1762-1979 .
The collection consists of an index and images of marriage records from North Carolina county courthouses. These records include licenses, marriage applications, marriage bonds, marriage certificates, marriage packets and cohabitation registers. Currently, portions of the following counties are represented in this collection: Alamance, Alexander, Anson, Ashe, Beaufort, Bladen, Buncombe, Cabarrus, Caldwell, Camden, Carteret, Caswell, Catawba, Chatham, Cherokee, Chowan, Cleveland, Columbus, Craven, Cumberland, Currituck, Dare, Davidson, Davie, Duplin, Durham, Edgecombe, Forsyth, Franklin, Gaston, Gates, Granville, Halifax, Hanover, Hyde, Johnston, Lincoln, Macon, McDowell, Mecklenburg, Montgomery, Northampton, Pitt, Richmond, Rowan, Surry, Wilkes. This collection is 46% complete. Additional records will be added as they are completed.
This collection covers marriages from 1762 to 1979.
|You can browse through images in this collection by visiting the browse page for North Carolina, County Marriages, 1762-1979.|
A coverage table for this collection is available in the wiki article North Carolina County Marriage Records Coverage Table (FamilySearch Historical Records).
Bonds usually list the following information:
- Names of bondsmen (one is usually groom)
- Name of bride
- Date of bond
- Place of residence of bride and groom (normally the bond was supposed to be filed in the county where the bride resided)
- Parent’s names were occasionally given on bonds from the 1850’s and 1860’s
Indexed register of marriages usually lists the following information:
- Name of groom
- Name of bride
- County of residence
- Ages of bride and groom
- Date of license
- Date of marriage
- By whom married
- Place of marriage
Licenses usually list the following information:
- Name of groom
- Name of bride
- Names of parents of bride and groom
- Places of residence of bride and groom
- Date of license
- Place where license was issued
- Date married (if a marriage then took place)
- Person performing marriage
- Age of bride and groom (on later licenses after about 1872)
- Race of bride and groom (on later licenses after about 1872)
- Date of birth (on later certificates)
- Whether parents were living (on later certificates)
Cohabitation register usually lists the following information:
- Name of bride
- Name of groom
- Place married
- Name of person who performed the marriage
- Date of marriage
How to Use the Record
This section provides information on how to search the collection, what to do with information once found, some tips on how to find records, what to do if no record is found, and some additional information about these records.
To begin your search it s helpful to know the name of your ancestor along with some other identifying information such as:
- The county where the marriage occurred.
- The approximate marriage date.
- The marriage place.
- The name of the intended spouse.
Search the Collection
To search the collection fill in the requested information in the boxes on the initial search page. This search will return a list of possible matches. Compare the information about the individuals in the list to what you already know about your ancestors to determine if this is the correct family or person. You may need to look at the information on several individuals comparing the information about them to your ancestors to make this determination. Keep in mind:
- There may be more than one person in the records with the same name.
- You may not be sure of your own ancestor’s name.
- Your ancestor may have used different names, or variations of their name, throughout their life.
- If your ancestor used an alias or a nickname, be sure to check for those alternate names.
- Even though these indexes are very accurate they may still contain inaccuracies, such as altered spellings, misinterpretations, and optical character recognition errors if the information was scanned.
For tips about searching on-line collections see the wiki article FamilySearch Search Tips and Tricks.
Using the Information
Use the locator information found in the index (such as page, entry, or certificate number) to locate your ancestors in the marriage records. When you have located your ancestor’s marriage record, carefully evaluate each piece of information given. These pieces of information may give you new biographical details that can lead you to other records about your ancestors. Add this new information to your records of each family. For example:
- Use the marriage date and place as the basis for compiling a new family group or for verifying existing information.
- Use the birth date or age along with the place of birth of each partner to find a couple's birth records and parents' names.
- Use the birth date or age along with the place of birth to find the family in census records.
- Use the residence and names of the parents to locate church and land records.
- Use the parent’s birth places to find former residences and to establish a migration pattern for the family.
Tips to Keep in Mind
- Occupations listed can lead you to employment records or other types of records such as military records.
- The name of the officiator is a clue to their religion or area of residence in the county. However, ministers may have reported marriages performed in other counties.
- Compile the marriage entries for every person who has the same surname as the bride or groom, this is especially helpful in rural areas or if the surname is unusual.
- Continue to search the marriage records to identify children, siblings, parents, and other relatives of the bride and groom who may have married in the same county or nearby. This can help you identify other generations of your family or even the second marriage of a parent. Repeat this process for each new generation you identify.
- Use the marriage number to identify previous marriages.
- When looking for a person who had a common name, look at all the entries for the name before deciding which is correct.
- The information in marriage records is usually reliable, but depends upon the reliability of the informant.
- Earlier records may not contain as much information as the records created after the late 1800s.
- There is also some variation in the information given from one marriage record to another record.
Unable to Find Your Ancestor?
- Look for variant spellings of the names. You should also look for nicknames and abbreviated names.
- Look for another index. There are often indexes at the beginning of each volume. Local genealogical and historical societies often have indexes to local records.
- Search the indexes and records of nearby localities.
- Try alternative search methods such as only filling in the surname search box (or the given name search box) on the landing page leaving the other box empty and then click on search. This should return a list of everyone with that particular name. You could then browse the list for individuals with the same family number.
Additional Information About These Records
Information on marriages is generally handwritten on pre-printed forms. Some eighteenth century bonds were written out by hand. During later years the information was typed. Licenses and registers may be arranged alphabetically by the grooms’ names or chronologically within a year. Sometimes records are separated by race.
For the period 1741-1868, marriages were performed after the posting of bonds or banns. Banns were the public announcement of an intended marriage made a few weeks before the actual marriage. They could be posted at the church or another public place for a given period of time. This would allow community members to express any objections to the marriage.
Bonds are promises of payment made by the groom and another person, many times a relative of the bride, if the groom contracted an illegal marriage. The bond was given to the minister or county official usually in the county where the bride resided at the time of the marriage and later returned to the county clerk.
Marriage licenses were rarely preserved before 1851. At that time a law required that all justices and ministers who performed marriages had to return the licenses to the county clerk who had issued them along with a marriage certificate. In 1868 the power to issue marriage license was given to the registers of deeds.
Cohabitation records were created in 1866 after the General Assembly passed an act allowing former slaves to register their pre-emancipation marriages before the county clerk or justice of the peace. Most registered before September 1, 1866.
Early marriage records such as bonds and banns were to ensure that no impediment to the marriage existed (such as another spouse). Licenses empowered the minister or justice of the peace to perform the marriage. Marriage certificates proved that the rite of matrimony had been legally performed. Registers were created as indexes to the original licenses and certificates.
Information included on marriage records is usually considered fairly reliable. Sometimes the bride or groom would lie about their age. If someone other than the groom, a relative or friend applied for the license, he may not have known all the information called for on the license.
Known Issues with This Collection
For a full list of all known issues associated with this collection see the attached Wiki article. If you encounter additional problems, please email them to email@example.com. Please include the full path to the link and a description of the problem in your e-mail. Your assistance will help ensure that future reworks will be considered.
Related Web Sites
Related Wiki Articles
Contributions to This Article
|We welcome user additions to FamilySearch Historical Records wiki articles. Guidelines are available to help you make changes. Thank you for any contributions you may provide. If you would like to get more involved join the WikiProject FamilySearch Records.|
Citations for This Collection
When you copy information from a record, you should list where you found the information; that is, cite your sources. This will help people find the record again and evaluate the reliability of the source. It is also good to keep track of records where you did not find information, including the names of the people you looked for in the records. Citations are available for the collection as a whole and each record or image individually.
- "North Carolina, County Marriages, 1762-1979." Index and Images. FamilySearch. http://FamilySearch.org : accessed 2013. Citing county offices throughout North Carolina.
Record citation (or citation for the index entry):
|The citation for a record is available with each record in this collection, at the bottom of the record screen. You can search records in this collection by visiting the search page for North Carolina, County Marriages, 1762-1979.|
|The citation for an image is available on each image in this collection by clicking Show Citation at the bottom left of the image screen. You can browse through images in this collection by visiting the browse page for North Carolina, County Marriages, 1762-1979.|
- This page was last modified on 9 September 2014, at 16:00.
- This page has been accessed 12,944 times.
New to the Research Wiki?
In the FamilySearch Research Wiki, you can learn how to do genealogical research or share your knowledge with others.Learn More