Help:How to add citations

From FamilySearch Wiki

(Difference between revisions)
m (Formatting)
(46 intermediate revisions by 10 users not shown)
Line 1: Line 1:
= How To Add Citations to the Wiki =
+
{{Help article}}
  
Contributors may add citations to the FamilySearch Wiki. In order to add citations, the user needs to be registered and signed on. The FCK Editor must be disabled to add citations (see below for instructions). Citations may be added individually, or multiple references may be made to the same source without re-typing it. The first set of instructions discusses how to add individual sources. The second section shows how to add multiple references to a single source.<br>
+
<br> Contributors may '''add citations''' to the FamilySearch Research Wiki. In order to add citations, the user needs to be registered and signed on. Citations may be added individually, or multiple references may be made to the same source without re-typing it. The first set of instructions (below) discusses how to add individual sources. The next section shows how to add multiple references to a single source.  
[[Help:FCK Editor]]<br>
+
# In the edit window, position the cursor at the point where the numeric reference to the source should appear.
+
# Type &lt;ref&gt;
+
# Immediately after &lt;ref&gt;, begin typing the source citation. (Although the source is typed in the body of the text, the source will not appear at this place in the text, but will appear at the bottom of the page on the article page.)
+
## Example: This is text from the article. I decide I need a source here. &lt;ref&gt;The New York Times, 1998, etc..
+
# After typing the source citation (The New York Times, 1998, etc..) type &lt;/ref&gt; with no space between the last character of the citation and &lt;/ref&gt; as shown below:
+
## Example: This is text from the article. I decide I need a source here. &lt;ref&gt;The New York Times, 1998, etc..&lt;/ref&gt;
+
# Continue adding sources as needed by repeating steps 1-4
+
# At the bottom of the page, type ==Sources==
+
# After ==Sources==, hit return and type &lt;references/&gt; or better yet, use the &#123;&#123;reflist&#125;&#125; template (this allows for multiple columns on some browsers).
+
# Check the visual layout by clicking “Show Preview” at the bottom of the page. If no changes are necessary, click “Save page”
+
  
= Adding Multiple References to One Citation =
+
Watch a [https://help.familysearch.org/kb/tutorials/en/fsdemos/FS_index.html?v=https://help.familysearch.org/kb/tutorials/en/fsdemos/WikiCitations video demonstration ]of how to add citations.
  
In a single article or page, the author may use the same source more than once. Rather than re-typing that source each time, the author may create a name for that reference in order to use it more than once without typing it. The first time it appears on the page, the author will type the entire citation. Thereafter, the “name” of the citation will cite the same source at the bottom of the page. The “name” allows an author to create several multiple references on the same page.
+
== Adding individual sources  ==
  
# In the edit window, position the cursor at the point where the first numeric reference to the source should appear.
+
#Log in to the FamilySearch Research Wiki
# Type &lt;ref name=”name”&gt; (While quotation marks need to appear around the actual name used, the name can be any word, characters, or combination of words.)
+
#Go to the&nbsp;article where you want to add a source. This may be done by searching for the article by name in the search box.<br>
## Example: &lt;ref name=”FHLC”&gt;
+
#Click '''Edit''' under the page options. This should open the editing window. If it does not, make sure you are registered and logged in first.<br>
# Immediately after &lt;ref name=”name”&gt;, begin typing the source citation. (Although the source is typed in the body of the text, he source will not appear at this place in the text, but will appear at the bottom of the page on the article page.)
+
#In the edit window, position the cursor next to the text where&nbsp;you want the numeric reference to the source to appear. (When finished, it will appear similar to a footnote.)<br>
## Example: &lt;ref name=”FHLC”&gt;The Family History Library Catalog, www.familysearch.org, etc..
+
#Next, locate and click on the '''&lt;R&gt;''' on the editing toolbar (shown in red below):<br>[[Image:ToolbarRef.png|thumb|center|400px]]
# After typing the source citation (The Family History Library Catalog, www.familysearch.org, etc..) type &lt;/ref&gt;
+
#After clicking '''&lt;R&gt;''' on the toolbar, the "Reference Properties" window will appear (shown below):[[Image:Reference properties.jpg|frame|center]]
## Example: &lt;ref name=”FHLC”&gt;The Family History Library Catalog, www.familysearch.org, etc..&lt;/ref&gt;
+
#In the "Reference text" box, type the source or reference information you wish to appear at the bottom of the article (similar to a footnote).
# The next time the FHLC source needs to be cited, type &lt;ref name=”FHLC” /&gt;
+
#Click '''OK''' to close the "Reference text" box. This will return you to the editing window.
# Step 5 may be repeated as often as needed when referring to the FHLC source citation.
+
#At the bottom of the article (in the editing window), type the following characters: <nowiki>{{reflist}}</nowiki>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; NOTE: This step needs to take place only one time in each article.
# Steps 1-4 may be continued using a different name for a different source that will be cited more than once.
+
#Use the outer scroll bar to scroll down until you can see the '''Save page''' button, and click '''Save page'''.  
# At the bottom of the page, type ==Sources==
+
#You will see a small number next to the text in the body of the article, and the source or reference information will appear at the bottom of the page with the corresponding number.
# After ==Sources==, hit return and type &lt;references/&gt; or better yet, use the &#123;&#123;reflist&#125;&#125; template (this allows for multiple columns on some browsers).
+
 
# Check the visual layout by clicking “Show Preview” at the bottom of the page. If no changes are necessary, click “Save page”
+
== Adding multiple references to one citation  ==
 +
 
 +
In a single article or page, the author may use the same citation more than once without re-typing that source each time. The author may create a name for that citation in order to use it more than once. The first time it appears on the page, the author will type the entire citation. Thereafter, the “name” of the citation will cite the same source at the bottom of the article. The “name” allows an author to create several references to the same source in the same article.  
 +
 
 +
#Log in to the FamilySearch Research Wiki
 +
#Go to the article where you want to add a source. This may be done by searching for the article by name in the search box.  
 +
#Click '''Edit''' under the page options.  
 +
#In the edit window, position the cursor next to the text where you want the numeric reference to the source to appear. When finished, it will appear similar to a footnote.  
 +
#Locate and click on the '''&lt;R&gt;''' on the editing toolbar (shown in red below):[[Image:ToolbarRef.png|thumb|center|400px]]
 +
#After clicking '''&lt;R&gt;''' on the toolbar, the "Reference Properties" window will appear (shown below):[[Image:Reference properties.jpg|frame|center]]
 +
#In the "Reference text" box, type the source or reference information you wish to appear at the bottom of the page (similar to a footnote). Type a name in the "Reference name" box, highlighted in red below. This name will be used to call the entire source or reference information if this source will be used more than once:[[Image:Reference properties with citation.jpg|frame|center|481x302px]]
 +
#Click '''OK'''. This will return you to the editing window.
 +
#If you have not done so before, in&nbsp;the editing window, type <nowiki>{{reflist}}</nowiki> at the bottom of the page.
 +
#The next time the source&nbsp;needs to be cited, follow steps 4-6. Instead of re-typing the citation, however, simply type the "Reference name" used in the previous citation in the "Reference name" box, (shown below)&nbsp;and then click '''OK'''. This may be repeated as often as needed. NOTE: The reference name is case sensitive. [[Image:Reference properties with ref. name.jpg|frame|center|482x301px]]
 +
#Remember to save your changes by scrolling down to the bottom of the page and clicking the '''Save page''' button.
 +
 
 +
== Training Video  ==
 +
 
 +
*Watch the citations training video by clicking [http://link.brightcove.com/services/player/bcpid1555199317001?bckey=AQ~~,AAAAsMO7iuE~,0a6boL_aMzRRMejnsVF7dLsOY4w3QTnL&bclid=1553564668001&bctid=1553796237001 here.]
 +
 
 +
<br>{{Contributor Help badge}}
 +
 
 +
== See also  ==
 +
 
 +
*[[FamilySearch Wiki:Verifiable]]
 +
 
 +
{{Contributor help-navbox}} {{Editing help}}
 +
 
 +
[[Category:Help|Citations]]

Revision as of 06:37, 11 August 2013

Help-content.png This help article will guide you as you edit in the Wiki. See Contributor Help for more help articles.



Contributors may add citations to the FamilySearch Research Wiki. In order to add citations, the user needs to be registered and signed on. Citations may be added individually, or multiple references may be made to the same source without re-typing it. The first set of instructions (below) discusses how to add individual sources. The next section shows how to add multiple references to a single source.

Watch a video demonstration of how to add citations.

Contents

Adding individual sources

  1. Log in to the FamilySearch Research Wiki
  2. Go to the article where you want to add a source. This may be done by searching for the article by name in the search box.
  3. Click Edit under the page options. This should open the editing window. If it does not, make sure you are registered and logged in first.
  4. In the edit window, position the cursor next to the text where you want the numeric reference to the source to appear. (When finished, it will appear similar to a footnote.)
  5. Next, locate and click on the <R> on the editing toolbar (shown in red below):
    ToolbarRef.png
  6. After clicking <R> on the toolbar, the "Reference Properties" window will appear (shown below):
    Reference properties.jpg
  7. In the "Reference text" box, type the source or reference information you wish to appear at the bottom of the article (similar to a footnote).
  8. Click OK to close the "Reference text" box. This will return you to the editing window.
  9. At the bottom of the article (in the editing window), type the following characters: {{reflist}}                   NOTE: This step needs to take place only one time in each article.
  10. Use the outer scroll bar to scroll down until you can see the Save page button, and click Save page.
  11. You will see a small number next to the text in the body of the article, and the source or reference information will appear at the bottom of the page with the corresponding number.

Adding multiple references to one citation

In a single article or page, the author may use the same citation more than once without re-typing that source each time. The author may create a name for that citation in order to use it more than once. The first time it appears on the page, the author will type the entire citation. Thereafter, the “name” of the citation will cite the same source at the bottom of the article. The “name” allows an author to create several references to the same source in the same article.

  1. Log in to the FamilySearch Research Wiki
  2. Go to the article where you want to add a source. This may be done by searching for the article by name in the search box.
  3. Click Edit under the page options.
  4. In the edit window, position the cursor next to the text where you want the numeric reference to the source to appear. When finished, it will appear similar to a footnote.
  5. Locate and click on the <R> on the editing toolbar (shown in red below):
    ToolbarRef.png
  6. After clicking <R> on the toolbar, the "Reference Properties" window will appear (shown below):
    Reference properties.jpg
  7. In the "Reference text" box, type the source or reference information you wish to appear at the bottom of the page (similar to a footnote). Type a name in the "Reference name" box, highlighted in red below. This name will be used to call the entire source or reference information if this source will be used more than once:
    Reference properties with citation.jpg
  8. Click OK. This will return you to the editing window.
  9. If you have not done so before, in the editing window, type {{reflist}} at the bottom of the page.
  10. The next time the source needs to be cited, follow steps 4-6. Instead of re-typing the citation, however, simply type the "Reference name" used in the previous citation in the "Reference name" box, (shown below) and then click OK. This may be repeated as often as needed. NOTE: The reference name is case sensitive.
    Reference properties with ref. name.jpg
  11. Remember to save your changes by scrolling down to the bottom of the page and clicking the Save page button.

Training Video

  • Watch the citations training video by clicking here.

Help-content.png Questions?
Visit the Wiki Contributor Help Forum to receive help with contributing to the Wiki.


See also